Custom homes discussions and local services.

Dealing with itchy pink nightmare in my attic

662 replies
 

Join the conversation

Share your experience or ask a follow-up question.

"One thing I noticed after switching was how much quieter our house became. Didn't expect that at all, but apparently spray foam helps dampen sound too?"

Totally noticed this too - it's like bonus insulation perks no one tells you about. On a related note, has anyone tried cellulose insulation? I've heard it's pretty good for soundproofing as well, and supposedly less itchy than fiberglass. Curious if it's worth considering for future attic projects...


Reply

Curious if it's worth considering for future attic projects...

I was skeptical about cellulose at first - seemed like just shredded paper, right? But we ended up using it in our guest room walls during a remodel, and honestly, it surprised me. Definitely quieter than the fiberglass we had before, and no itchy nightmare either. Only downside is it can settle over time, so you might lose some insulation value eventually. Still, way better than dealing with that pink stuff...


Reply

Agree with you on cellulose - used it in a few attic projects myself. Couple quick points from experience:

- Definitely less itchy and easier to handle than fiberglass, no argument there.
- Settling is real, but you can minimize it by installing at the right density. A good installer who knows their stuff makes a huge difference here.
- One thing to keep an eye on is moisture. Cellulose can absorb humidity more readily than fiberglass, so proper attic ventilation becomes even more important. Learned that the hard way when we had some condensation issues one winter...
- Also, rodents seem less interested in cellulose compared to fiberglass - maybe it's treated or something? Not sure exactly why, but fewer pest issues overall.

Overall, I'd say it's a solid choice for attics if you're careful about installation and ventilation.


Reply

"One thing to keep an eye on is moisture. Cellulose can absorb humidity more readily than fiberglass..."

Good points overall, but I have to say the moisture issue was a deal-breaker for me. Even with decent ventilation, my attic tends to get pretty humid in summer storms, and cellulose just seemed too risky. Ended up going with mineral wool instead - still way less itchy than fiberglass, handles moisture better, and wasn't too harsh on the wallet either. Might be worth considering if humidity's a concern...


Reply

Ended up going with mineral wool instead - still way less itchy than fiberglass, handles moisture better, and wasn't too harsh on the wallet either.

Mineral wool's a solid choice, but honestly, cellulose isn't as risky as it sounds. With proper installation and a vapor barrier, moisture absorption is manageable. I've seen it hold up surprisingly well even in humid climates...just gotta get the details right.


Reply

Mineral wool's decent, but cellulose really isn't as straightforward as you're making it sound. Sure, vapor barriers help, but I've seen enough attics to know that installation is rarely perfect. Tiny gaps or punctures happen all the time - especially when you've got electricians or HVAC guys crawling around up there later on. And once moisture gets in, cellulose can compact and lose its insulating value pretty quickly. Mineral wool tends to be a bit more forgiving in real-world conditions.


Reply

Good points on cellulose - seen similar issues myself.

- Mineral wool definitely handles moisture better, less likely to compact or degrade.
- But honestly, even mineral wool isn't foolproof if installation's sloppy.
- Bottom line: insulation's effectiveness usually comes down to careful install and maintenance...regardless of material.


Reply

Fair points, but I'd argue material choice matters more than you're suggesting. Sure, installation quality is key, but some materials - like spray foam - are inherently more forgiving of minor install mistakes. Seen it firsthand on several projects...just something to consider.


Reply

You're spot on about spray foam being forgiving - I had a similar experience renovating an older home a few years back. The attic was a disaster zone with that itchy fiberglass stuff everywhere, and even though the crew wasn't exactly meticulous, the spray foam covered up a multitude of sins. Still, I wouldn't completely discount the importance of skilled installation. I've seen some pretty questionable spray foam jobs too - uneven application or missed spots can still lead to drafts and moisture issues down the line.

Curious though, have you (or anyone else here) tried cellulose insulation? I've heard mixed reviews - some swear by it for being eco-friendly and effective, while others complain it's messy and settles over time. Wondering if it's worth the hassle compared to spray foam...


Reply

We went back and forth on cellulose when we built our place last year. Ended up going with spray foam mostly because the installer talked me out of cellulose, saying it settles and can leave gaps over time. But my brother-in-law swears by cellulose - he insulated his attic with it maybe five years ago and says it's holding up fine. Honestly, seems like it comes down to how well it's installed and your tolerance for potential messiness or settling down the road...


Reply

"Honestly, seems like it comes down to how well it's installed and your tolerance for potential messiness or settling down the road..."

Yeah, I think you're spot on with that. I've seen cellulose done really well, and I've also seen some pretty sketchy installs. My neighbor had cellulose blown into his attic about eight years ago, and he swears by it - says his heating bills dropped noticeably and it's still holding up fine. But then again, he was super picky about who did the job and made sure they packed it in properly.

On the flip side, my cousin had cellulose put in by a less experienced crew, and after a few years he noticed some settling and uneven spots. He ended up having to go back up there himself to fluff it up and add more insulation. Not exactly a fun weekend project...

I went with spray foam myself, mostly because I wanted something low-maintenance and airtight. But lately I've been reading more about the environmental impact of spray foam - especially the blowing agents used - and it's got me second-guessing my choice a bit. Cellulose seems way greener since it's mostly recycled paper, but then there's that whole settling issue again.

One thing I'm curious about though - has anyone here tried dense-pack cellulose instead of loose-fill? I've heard dense-pack doesn't settle nearly as much because it's installed under pressure. Wondering if that's true or just marketing hype...


Reply

One thing I'm curious about though - has anyone here tried dense-pack cellulose instead of loose-fill?

I've been wondering about dense-pack cellulose myself. A friend had it installed in his walls a few years back, and he says it's held up great - no noticeable settling issues yet. Might be worth looking into if you're leaning that way...


Reply

Dense-pack cellulose is definitely a solid choice, especially if you're tired of dealing with itchy fiberglass. A couple things to keep in mind though:

- Dense-pack cellulose typically has better air-sealing properties compared to loose-fill. That means fewer drafts, which can really help comfort-wise and with energy bills.
- It also tends to perform better over time since it's packed tightly enough to minimize settling. I've seen installations from 10+ years ago that still look great.
- One minor downside: installation can be trickier, especially in tight attic spaces. You'll probably want an experienced installer who knows how to get the density right - too loose and you lose some of the benefits; too dense and you risk bowing drywall or other surfaces.
- Also, make sure your attic ventilation is properly set up before switching insulation types. Cellulose handles moisture differently than fiberglass, so ventilation becomes even more important.

I switched to dense-pack cellulose about five years ago, and honestly, I wouldn't go back. The attic feels noticeably less drafty, and my heating bills dropped a bit too. Worth considering if you're already leaning in that direction...


Reply

"Dense-pack cellulose typically has better air-sealing properties compared to loose-fill. That means fewer drafts, which can really help comfort-wise and with energy bills."

Couldn't agree more on this. I've recommended dense-pack cellulose to several clients over the years, and the feedback has always been positive. The key really is finding someone who knows what they're doing - seen a few DIY attempts go sideways. But once it's done right, it's a huge improvement over fiberglass...and no more itchy weekends spent crawling around up there.


Reply

I've been looking into dense-pack cellulose myself, and while I agree it's probably better than fiberglass (seriously, who wants to deal with that itchy mess?), I'm still weighing the cost-benefit. From what I've seen, dense-pack cellulose installation can be pricier upfront, especially if you're hiring someone experienced to do it right. But then again, if it cuts down on drafts and energy bills long-term, maybe it's worth the initial hit?

I did some rough math based on my current heating bills and estimated savings from improved insulation. Looks like it could pay for itself in a few years...but that's assuming energy prices stay stable (which they never seem to). Also heard some mixed things about moisture control - anyone had issues with humidity or mold after switching over? Would hate to solve one problem just to create another.

Still leaning toward cellulose overall, but definitely want to make sure I'm not overlooking anything important before pulling the trigger.


Reply

I switched to dense-pack cellulose about four years ago, and honestly, I'd never go back to fiberglass. Had the same concerns about humidity initially...

"Also heard some mixed things about moisture control - anyone had issues with humidity or mold after switching over?"

But with proper air sealing and a decent vapor barrier, moisture hasn't been an issue at all. My energy bills dropped noticeably, and the house just feels more comfortable overall. Yeah, upfront cost stings a bit - but comfort counts for something too, right?


Reply

Good to hear your experience - I've been crunching numbers on cellulose myself. The upfront cost is definitely a hurdle, but if the comfort and savings balance out over a few years... might just be worth biting the bullet. Thanks for sharing your take.


Reply

I recently switched a client's attic insulation from fiberglass to cellulose, and while the upfront investment was definitely noticeable, they reported a significant improvement in comfort - especially during extreme temperature swings. From what I've seen, cellulose seems to handle humidity fluctuations better too, which is a nice bonus. Still early days for them on energy savings, but initial feedback has been pretty positive. Definitely worth considering if you're looking at long-term comfort and efficiency...


Reply

Interesting to hear about cellulose working out so well. I've always wondered if it really makes that big of a difference compared to fiberglass. My attic's still rocking the itchy pink stuff, and humidity swings have definitely been noticeable lately... Do you think cellulose installation is DIY-friendly, or better left to the pros? Curious if anyone's tried tackling this themselves and how messy it gets.


Reply

Cellulose is decent stuff - definitely cuts down on humidity swings better than fiberglass, but DIY? Eh, depends how you feel about breathing in dust clouds for an afternoon. I've seen homeowners tackle it and end up with cellulose fluff everywhere, even downstairs on their furniture... not fun. If you're handy and patient (and have a good dust mask), it's doable. But honestly, pros get it done cleaner and faster. Curious though, have you checked ventilation first? Sometimes improving airflow alone can solve humidity headaches without the insulation hassle.


Reply
Scroll to Top