Custom homes discussions and local services.
Need advice on replacing an old leaky roof
NEED ADVICE ON REPLACING AN OLD LEAKY ROOF
I get where you’re coming from about the crew being key, but I’m not totally convinced that “good enough” materials are always fine, even with a solid installer. When I built my place last year, I went with a local crew everyone raved about, but I also insisted on one of the higher-end shingle lines (GAF Timberline HDZ, for what it’s worth). It was pricier, but my thinking was - this is the one part of the house that’s supposed to last 20+ years, and I didn’t want to gamble.
I actually spent less on some of the “extras” like fancy ridge vents or copper flashing, and put the budget into the main roof system. Maybe it’s overkill, but I’ve seen too many neighbors have to patch up “good enough” shingles after a couple bad storms. Around here, wind and hail are brutal, so I wanted something that could take a beating.
On warranties - I hear you about the loopholes, but I still registered mine. It’s a pain, but if something major goes wrong, at least there’s a paper trail. Not saying it’s a magic fix, but it beats having nothing.
One thing I’d push back on: sometimes the smaller crews are stretched thin or take shortcuts if they’re juggling too many jobs. The big companies can be hit or miss, but at least they have more oversight (in theory). I guess there’s no perfect answer, but for me, I’d rather overbuild the roof once than risk leaks or repairs down the line. Just my two cents - everyone’s situation is different.
NEED ADVICE ON REPLACING AN OLD LEAKY ROOF
I’m right there with you on not skimping for the “good enough” stuff, especially with how roofs take a beating these days. I did a reroof on my old place and went with mid-grade shingles to save cash, but honestly, after two years and a couple of nasty windstorms, I was patching spots already. Never again. It’s wild how much difference the shingle quality makes when you’re staring at blown-off tabs in your yard.
That said, I do think some of the “extras” can matter more than people realize - like ice & water shield in the valleys or around chimneys. I skipped that once and paid for it later with a slow leak that took forever to trace. Maybe copper flashing is overkill, but a few strategic upgrades can save headaches.
About crews - yeah, smaller outfits can be hit or miss. I’ve seen some hustle hard and take pride, but others just rush to the next job. Big companies have more oversight, but sometimes you get stuck with whoever’s available that week. It’s a gamble either way.
Warranties are a pain, but I agree - better to have something on file than nothing at all. At least it gives you some leverage if things go sideways.
NEED ADVICE ON REPLACING AN OLD LEAKY ROOF
I get the logic behind going all-in on shingle quality, but I’m not totally convinced that’s the only thing that matters in the long run. I’ve seen high-end shingles fail just as quickly when the install isn’t up to par or the ventilation’s off. Honestly, I’d argue that a solid underlayment and proper flashing do more for longevity than just picking the priciest shingle on the shelf.
On the topic of copper flashing - yeah, it’s expensive, but sometimes that’s the only thing that holds up in certain climates. I had aluminum flashing corrode in under five years near the coast, which was a pain. Copper looked like overkill at first, but it’s been maintenance-free ever since.
As for crews, I’ve had better luck with smaller companies, but only after doing some digging and getting references. The big firms can feel impersonal, and sometimes you’re just a number on their schedule. Either way, it’s a bit of a roll of the dice... but I’d rather gamble on a crew with a good reputation than just the biggest name in town.
Honestly, I’d argue that a solid underlayment and proper flashing do more for longevity than just picking the priciest shingle on the shelf.
Couldn’t agree more - had a neighbor drop serious cash on “lifetime” shingles, but the installer cut corners with ventilation and skipped ice & water shield. Fast forward six years, and he’s patching leaks anyway. I always tell folks: a roof’s only as good as its weakest layer. Copper flashing’s definitely pricey, but near salt air? Worth every penny. I’d rather pay upfront than keep chasing leaks. Smaller crews with solid references have been gold for me too - at least you can talk to the person actually swinging the hammer.
I’ve seen that play out too many times - folks drop a fortune on “premium” shingles, but then the crew rushes the underlayment or skips proper flashing around chimneys and valleys. Doesn’t matter how fancy the top layer is if moisture’s sneaking in underneath. I actually did my own roof a couple years back, and I spent more time fussing over the ice & water barrier and step flashing than laying shingles. Copper’s expensive for sure, but I live about 10 miles from the coast and aluminum just doesn’t hold up as well against salt spray.
I’m curious - has anyone tried any of those newer synthetic underlayments? I used Grace Ice & Water Shield for the eaves and valleys, but went with a cheaper synthetic for the rest. Seemed easier to work with than felt, especially solo, but I wonder how it holds up long term. Anyone have thoughts or regrets on that front?
Title: Need advice on replacing an old leaky roof
You’re spot on about the underlayment and flashing - those details make or break a roof, no matter how fancy the shingles are. I’ve used synthetic underlayments on a few projects now, and honestly, I haven’t seen any issues crop up yet. They’re definitely easier to handle than felt, especially if you’re working alone or in weird weather. Grace Ice & Water is still my go-to for vulnerable spots, but the synthetics seem to hold up well as long as you don’t cheap out too much. You did it right focusing on those layers first.
Title: Need advice on replacing an old leaky roof
I’ve got to admit, I was skeptical about synthetic underlayment at first. Grew up watching my dad use felt on every job, and he swore by it - said it was the only thing that stood up to our crazy spring storms. But after wrestling with those heavy rolls in the wind (and nearly sliding off the roof more than once), I finally caved and tried synthetic last summer. Night and day difference. Way lighter, didn’t tear up when I dragged it around, and it actually stayed put when the wind picked up.
That said, I’m still not totally convinced it’s as tough as felt over the long haul. Maybe I’m just old school, but I keep wondering if we’ll see issues pop up in ten or fifteen years that nobody’s talking about yet. Still, for ease of install and dealing with unpredictable weather, synthetics have made my life a lot easier. And yeah, Grace Ice & Water is non-negotiable for valleys and eaves - learned that the hard way after a nasty ice dam a few winters back. Sometimes you just can’t cut corners, no matter how tempting it is to save a few bucks.
Title: Need advice on replacing an old leaky roof
I hear you on the felt vs. synthetic debate. I was in the same boat for a long time - felt just seemed like the tried-and-true option, and I’d seen it hold up through some pretty rough seasons. But after a couple of projects where we had to haul those heavy rolls up three stories in the middle of a windstorm, I started rethinking things. The last big job I did, we switched to synthetic mostly because the crew was tired of fighting with felt in bad weather. Honestly, it made the install way less stressful.
That said, I still have mixed feelings about how these synthetics will age. Manufacturers love to talk up the UV resistance and tear strength, but there’s not a ton of real-world data past maybe 15 years. Felt’s got that track record - if it’s installed right, you know what you’re getting. Synthetics are still kind of a gamble long-term, at least in my mind.
One thing I’ve noticed is that some synthetics get slick when they’re wet, which can be a pain if you’re up there during a surprise shower. Not a dealbreaker, but something to watch out for. And yeah, Grace Ice & Water Shield is a must for me too, especially on older homes with weird rooflines or shallow pitches. I’ve seen too many “budget” jobs come back to haunt people after a rough winter.
At the end of the day, I think it comes down to what you’re comfortable with and what kind of weather you’re dealing with. If you’re in an area with wild temperature swings or heavy storms, I’d still lean toward overbuilding those critical spots - valleys, eaves, anywhere water likes to sneak in. Cutting corners there just isn’t worth it... learned that lesson more than once.
Funny how much roofing comes down to balancing old habits with new tech. Sometimes you just have to pick your battles and hope you don’t end up patching leaks in February.
Title: Need advice on replacing an old leaky roof
I get where you’re coming from about the reliability of felt, but I’d actually push back a bit on the idea that synthetics are a gamble long-term. There’s definitely less data compared to felt, but some of the higher-end synthetic underlayments have been through accelerated aging tests and have held up surprisingly well. I’ve seen a few case studies - granted, mostly from Europe - where synthetics have been in service for 20+ years without major issues. Not saying that’s universal, but it’s not quite the wild west some folks make it out to be.
From a green building perspective, I’d argue that synthetics can actually be the more sustainable choice, depending on the product. Some of them are made with recycled content and are lighter to transport, which cuts down on emissions. Plus, if you’re dealing with a roof that’s tricky to ventilate or insulate, synthetics can help manage moisture better than felt, which is pretty important for energy efficiency and indoor air quality. Felt can trap moisture if things go sideways, and that’s a recipe for mold or rot - seen it happen more than once in older homes.
The slip factor is real, though. I’ve had a few tense moments up there when things got slick. But honestly, I’d rather deal with that than have to rip up a bunch of swollen, soggy felt after a storm delay. And as for Grace Ice & Water Shield, totally agree - it’s non-negotiable in my book, especially with climate getting weirder every year.
If you’re really worried about longevity, maybe look into hybrid systems - synthetic underlayment with a self-adhered membrane in the valleys and eaves. It’s a bit more upfront, but you’re hedging your bets on both performance and durability. Sometimes it’s worth paying a little more now to avoid headaches (and landfill trips) later.
Old habits die hard, but sometimes the new stuff really does solve problems the old stuff just couldn’t.
I hear you on the slip-and-slide factor with synthetics - those things can be like walking on a banana peel if there’s even a hint of dew. Still, I keep coming back to the moisture management piece. I’ve seen too many old roofs where felt just became a petri dish for mold after a minor leak went unnoticed. That’s not just bad for the house, it’s rough on anyone with allergies or asthma.
The hybrid approach makes a ton of sense, especially if you’re in an area where freeze-thaw cycles are a thing. It’s not the cheapest route, but neither is dealing with rot repairs down the road... ask me how I know. Plus, some of the newer synthetics are actually recyclable at end-of-life, which feels like a win compared to tossing soggy felt in the landfill.
It’s funny - ten years ago, I’d have sworn by felt without thinking twice. Now? I’m all about finding something that’ll outlast me and keep the attic dry, even if it means learning to ice skate up there once in a while.
I’ve seen too many old roofs where felt just became a petri dish for mold after a minor leak went unnoticed.
You’re spot on about the mold risk - once it’s in, it’s tough to get out, and it can really wreck indoor air quality. The hybrid approach isn’t cheap, but you’re investing in the health of the whole house. I’ve seen clients regret cutting corners on underlayment more than once. Sometimes paying more upfront really does save headaches later.
Sometimes paying more upfront really does save headaches later.
I get that logic, but dang, the price tags on some of these hybrid underlayments make my wallet cry. I did a tear-off last summer and ended up splitting the difference: ice & water shield in the valleys and eaves, then a synthetic felt elsewhere. Haven’t had a leak yet, knock on wood. Anyone else try layering like that? It felt like a decent compromise without going full luxury-roof.
I’ve done almost exactly what you described - ice & water in the trouble spots, then synthetic felt for the rest. Here’s how it played out for me:
- Valleys and eaves are where I always see leaks first, so that’s where I splurged.
- Synthetic felt is lighter and way easier to handle solo, but it can get slippery if you’re not careful.
- Haven’t had any issues after two winters, though I did notice some minor wrinkling where the felt overlapped.
Honestly, unless you’re in a spot with crazy weather or a super low slope, that hybrid approach seems like a solid middle ground. Full luxury underlayment just didn’t make sense for my budget either... roofs are expensive enough already.
Need Advice On Replacing An Old Leaky Roof
I get the budget angle, but I’ve gotta say - I went full ice & water shield on my last roof after dealing with a nasty wind-driven rain leak that showed up nowhere near a valley or eave. It was overkill for my area, but honestly, the peace of mind has been worth it. Synthetic felt is fine, but if you ever get sideways rain or ice dams, that extra layer everywhere can save you some headaches down the line. Just my two cents... sometimes spending a bit more upfront saves a lot later.
sometimes spending a bit more upfront saves a lot later.
That’s a solid point, and I totally get where you’re coming from. I used to think ice & water shield everywhere was just for folks in the far north, but after seeing a neighbor’s attic after a freak storm, I changed my tune. It’s one of those things - if you can swing it, that extra protection really does help you sleep better when the weather gets wild.
If you’re looking to keep things green, there are some underlayments now that are made with recycled content and lower-VOC adhesives. They cost a bit more, but they’re way better for indoor air quality and the planet. I’d also suggest checking if your roofer recycles old shingles - some do asphalt recycling now, which is pretty cool.
Anyway, you’re not alone in weighing budget vs. peace of mind. It’s a tough call, but it sounds like you’re thinking it through. Good luck with the project - hope it goes smoother than my last one (which involved a surprise squirrel family).
Had a similar debate with myself a few years back when our roof started leaking right over the kitchen. Ended up biting the bullet and going for the upgraded underlayment and better shingles. It stung at first, but honestly, we haven’t had a single issue since - even after some nasty windstorms. One thing I wish I’d done differently: double-checking the attic ventilation. Missed that detail and had to add more vents later. If you’re already spending the money, might as well make sure it’s all done right the first time.
NEED ADVICE ON REPLACING AN OLD LEAKY ROOF
I get the logic behind going all-in with upgraded materials, but I think there’s a point where you can overdo it for an average house. Here’s what I’d consider before shelling out for every bell and whistle:
- Not every roof needs the priciest underlayment or top-tier shingles, especially if you’re not in an extreme weather zone. Sometimes mid-grade materials are more than enough and save you a chunk of change.
- Ventilation is important, but I’ve seen folks go overboard and end up with too much airflow, which can actually mess with your heating/cooling bills. Balance is key - sometimes just adding a ridge vent or a couple soffit vents does the trick.
- If you’re planning to stay in the house for decades, sure, invest a bit more. But if you might move in 5-10 years, it rarely pays off to max out on upgrades.
- One thing people skip: checking the decking under the shingles. If it’s old or has soft spots, replacing that at the same time saves a headache later. I learned that the hard way when a “small” leak turned into a full section of rotten wood.
- Don’t forget about warranties. Sometimes, higher-end shingles come with longer warranties, but only if they’re installed by certified contractors. Worth double-checking before you commit.
I get wanting to do it right the first time, but sometimes “right” just means solid materials and good workmanship - not necessarily the most expensive options across the board. Everyone’s situation is different, but I wouldn’t assume more expensive always equals better in the long run.
NEED ADVICE ON REPLACING AN OLD LEAKY ROOF
Honestly, this is the kind of practical advice I wish more folks would give. It’s wild how fast you can get upsold on “lifetime” this and “premium” that, when half the time you just need a roof that doesn’t leak and won’t blow off in the first storm. I learned my lesson years ago - dumped a bunch of cash into high-end shingles thinking I was getting Cadillac quality, but the installer cut corners and I still ended up with issues. Turns out, good installation is worth more than fancy materials nine times out of ten.
Totally agree on the ventilation thing too. My neighbor went nuts with extra vents “for energy efficiency.” Next thing he knew, his attic was freezing in the winter and his heating bill shot up. Sometimes less is more, especially if you’re not in a climate where ice dams are a big deal.
I’d add - if you’re getting quotes, watch out for contractors who try to scare you into every upgrade. Some of them act like your house will collapse if you don’t buy the gold-plated underlayment. When I did my last roof, the guy tried to convince me I needed “hurricane” shingles. I live in Indiana. If we get hurricane winds, my roof is the least of my problems.
And decking - yes, yes, yes. People love to ignore what’s under the shingles because it’s out of sight. Had a patch job turn into a full day’s work when we found rot underneath. Way better to bite the bullet and fix it all at once.
Warranties are a mixed bag too. Some sound great on paper, but if you read the fine print, they’re void if you so much as look at your roof funny or use the wrong nails.
Bottom line for me: solid mid-grade materials, a reputable installer, and don’t get talked into features you don’t need. Save the fancy stuff for your kitchen counters or something you actually see every day.
NEED ADVICE ON REPLACING AN OLD LEAKY ROOF
Couldn’t agree more about installation making all the difference. I did my own roof a few years back - went with basic architectural shingles, nothing fancy. Took my time on the flashing and underlayment, and it’s held up great. Honestly, I’d rather have a solid install over “premium” anything. Funny how the stuff you can’t see ends up mattering most.
NEED ADVICE ON REPLACING AN OLD LEAKY ROOF
That’s spot on - most folks get caught up in the brand or style, but in my experience, the real difference is in the details you don’t see. I’ve overseen a lot of builds and even the priciest shingles won’t save you if the underlayment or flashing is sloppy. Had a project years back where a crew rushed the prep work to save time... ended up with leaks in less than two years. Lesson learned: proper prep beats fancy materials every time.