KEEPING THE COLD OUT: MY STEP-BY-STEP FOR DRAFT-PROOFING DOORS

aspenskater · 2026-03-28T19:19:36Z

Here’s how I tackled making my old back door less of a wind tunnel last winter. I’m not claiming it’s the “pro” way, but it made a noticeable difference in my heating bill, so maybe it’ll help someone else. First thing I did was check for drafts with that classic candle trick (hold a lit candle near the edges and see if the flame dances). My door was leaking air all around the frame and especially at the bottom—no surprise there. Next up, I grabbed some weatherstripping from the hardware store. There’s like a million types, but I went with the foam tape because it was cheap and honestly, I didn’t want to mess with anything complicated. Peeled and stuck it around the inside edge of the door frame. For the bottom, I used one of those door sweeps you screw in (the adhesive ones always peel off for me after a month or two). After that, I tightened the hinges a bit since the door was sagging and wasn’t closing flush. Didn’t realize how much that mattered until I did it—definitely helped the seal. Last step: I put a draft stopper (just an old rolled-up towel, honestly) along the bottom when it got really cold at night. Not high-tech, but it works. I’m sure there are fancier options out there—like those insulated core doors or whatever—but this was all stuff I could do with basic tools and about $20. Anyone have better tricks, or maybe a way to make it look less like I’m barricading myself in for a zombie apocalypse?

Page 16 / 16 Prev

Insulation and Energy Efficiency Measures

Last Post by cyclist25

76 Posts

74 Users

0 Reactions

510 Views

RSS

Posts: 9

cyclist25

(@cyclist25)

Active Member

Joined:

Honestly, I’ve never had a magnetic seal line up right on any of my doors—old houses just aren’t built for that kind of precision. I’ve patched with foam, weatherstripping, even an old wool scarf once. If it keeps the wind out, I call it a win.